Combines looking for a 24 ft flex header for my l3

I do not think that there were factory flex heads that big for conventional. You can get a 25 foot newer head and try to do major adapting to center section, and have a pretty good head, or you can go with the add-on hart-carter setup that was standard equip before series 3 flex. this was an okay setup, but just okay, not great. You can go with other brands using a bish plate, mainly JD or IH. as far as i know, a 1020 or a 224 flex are good units. What is the applicationIJ could a Macdon workIJ Good luck!

I'm looking for one to harvest soybean's and need a bigger size than 20 ft as have lot's of acre's to cover and a very short window of harvesting weather. I have thought about going with another brand header but was hoping to find one that was gleaner made as for hook up and auto headed controlled. I don't know if macdon would work on an l3 and if it would get low to the ground to get the bean's.