Combines massey headers

I would like to know if a 6 row corn head is to big for a 550 combine and where I might find a 5 row we want 30 inch rows

I don't know if this a good place to post this question or not but maybe someone can help me. I've never seen a 5542 with a straight cut header but is there a header that fits themIJ

I am having troble with my 1163 head. the stalks do not make it to the flutes. The spirrall points do all the work. My flutes still have a square edge on them after sevaral years use. On one set, I tappered the leading edge back. Tought that might help but it did not.Do I need to set the gathering chains in closer, or change the speed of the flutes or even change the front spaceng of the rollersIJ

My 1859 soybean head is developing rust holes in the floor, and I'm looking for the best way to fix the problem. I would appreciate readers' experiences in: 1. patching methods (body filler, fiberglass, brazing in patches, pop-riveting patches, MIG welding patches) 2. doubling up the floor (with galvanized metal, stainless steel, or even high density Polyethelene).

I have a JD 222 flex head for sale good condition with poly possibly with trailer. Ph.n 620-459-6261

we are building an ear corn harvester to preprocess ear corn silage for dairy feed. in 100 bu corn , can a 410 handle a 6 row headIJ is the base machine strong enough to handle the 6 row narrow headIJ input please.

I need an 1859 flex head in good working condition to combine beans with. I want a 15' or 16' head. I am located in eastern Nebraska. Please get back to me if you have one.

What is_was the largest flex head offered by Massey FergusonIJ I am looking for something in the 24' range to put on my (gasp!!!) IH combine. The adapter is no problem, I was thinking of something in the 9100 series as that has the hyd reel drive that would work well with my combine. Our local dealer tells me nothing larger then a 20' was ever made by massey, but I seem to remember reading about 24' and 30' headers years ago. I am located in South Eastern South Dakota. Thanks for the help in advance! Doc

We have some nice heads for sale. '98 825 flex, manual reel_poly_std. cut sickle, came off C-62 gleaner, will fit MF '01 820 flex, manual reel_poly_std. cut sickle, came off MF 8780 '98 636 hugger corn head, real low acres, will fit MF or all gleaners located in eastern NE, give me a call!! Thanks, 402-643-3290

I am looking at getting a macdon header for our 8570. Have not seen a lot of MF_Macdon adapters for sale. Have heard that a Case_IH adapter will work. Is there any mods that have to be done to the adapter or will it fit right onIJ Any help would be appreciated.