Sorry - I don't have a parts book. The dealer I was at had a picture on a computer screen, and I showed him which belts they were. There is a set of 2 of them, and they're different lengths. The top one starts at the main shaft that comes out of the end of the engine. It goes down to a split pulley about halfway down the side of the combine. The second belt goes from that pulley down to the clutch housing, which is behind the left front tire. I tried searching the internet for a picture of one, but haven't come up with anything. For the moment that's all the detail I can come up with. I do appreciate your offer of assistance.
I just bought the lower from my MF dealer and it was $158. He said the other one was about the same price. Thus the two would be closer to $300 and some change. MY QUESTION...How in the heck do you get the double pully outIJ I loosened the adjusting bolt and all but it doesn't want to still come out. HElP !!
I'm not exactly sure how to get the dumb thing out - I figured I'd cross that bridge when I came to it. I wonder what the deal is with the pricesIJ Maybe I need to check again and see if the guy just looked up the wrong numbers or something. Don't suppose you'd be willing to get me the part number off the belt you got, would youIJ
I also looked in my Abilene Machine book and the prices are cheaper yet if you go with a non-OEM belt. They sell Goodyear Ag-belts. Call 1-800-255-0337 ask for Ben and he should get you the best price for a new one.
I also looked in my Abilene Machine book and the prices are cheaper yet if you go with a non-OEM belt. They sell Goodyear Ag-belts. Call 1-800-255-0337 ask for Ben and he should get you the best price for a new one.
upper traction belt n is 833793m1, lower 833794m1. call JayDee Enterprises, Willoughby, Ohio, 440.946.9367 for source other than your dealer. if you need dimensions, i have them. you can email me at farmers@nbnet.nb.ca