Combines MF750 Re Thrasher settings for Wheat Please

Guy_C

Guest
Keep the 'concave' bars as close as you can them to the cylinder bars.If either bar is worn,change them.
 

Gordo

Guest
Close your concave as tight as you can get it without it contacting the rub bars. Set the cylinder speed @ 900 rpm, back off speed if grain is cracking. If cracking persists open concave 1 notch. Top siev set at 9_16" wind on high. lower sievs set at 3_8" more or less as needed to get a decent sample. Back section of bottom siev set @ 9_16". open middle and bottom siev if too much is going to rethresher. Good luck!
 
 
Top