Combines Monitor question

Clarence, Contact www.agleader.com for yield monitor support or www.trimble.com for receiver info_support. I'm not sure who makes Case's displays but these guys make the rest of the system. Just tell them what you have and they'll help you. You'll also need a card and card reader(transfer info from combine to your computer) I'd suggest a USB (outboard) flash reader. Contact www.envoydata.com for this. You might consider a litebar guidance system when purchasing the receiver. They have package deals and the receiver can be used with the combine. Hope this helps.

Clarence, I have a used Agleader GPS Reciever and cards for sale that are like new and priced very reasonable. If interested, I can give you more details. I also am an Agleader dealer.

Clarence, I take it your have the yield monitor in the combine now. All yoou should need is a universal receiver and antenna. Depending where you are located in the country you could get by very well with a beacon antenna. And like was previously stated cards and a card reader.

Clarence, If you're wanting to do it the cheapest way possible, a garmin 17n receiver will work on the case for about $200. You will hook it up inside the panel on the right side of the cab. e-mail me if you have any questions at ellisce@missouri.edu. There's an article about what I've done in the new Successful Farming.

We use the receiver from our Outback on our caseIH yield monitor. We had to buy a cable from them to make the connection for about $65 if I remember right.

I am also looking into updating my '95 2166 so that I can receive a satallite signal. Case said my original receiver is outdated. Do you have what would be required to update my systemIJ If so, what would the approximate cost beIJ