NDDan
Guest
loewen had seperator side available with 1" X 1 1_4" holes as compared to Gleaners 1"X1" holes but hard to say if they still have them available after AandI took them over. The seperator cage they offered had a single removable door similiar to P3s and would closely match or exceed the seperating capacity of Gleaners original cage that had the corn doors installed. The corn door had the 1"X1 1_4" holes. I would suggest the channel helicals when you do the job. If doing the channel helicals and want to refresh the original thresher side you may consider fliping locations of the doors on thresher side to get most unworn doors in higher wear area and then welding in new cage section just beyond concave. This will refresh cage quite well.Good luck