Combines N5 wheat settings

Cylinder speed 800-1000rpm. Concave clearance 1_2"-5_8" depending on how much and how even feed is. Fan setting 6-7. With any modifications you should not need cage covers. Sometimes in the RH and lH corners and also in the center at the back of the cage where concave arm is attached in the center are places that sometimes bother thw cage sweep. Hyper Harvest II

Thanks, That helps me alot. Hopefully will get running this afternoon. Tim

Also if you are going to bale the straw and have a chopper you need to retract the knives and put the chopper on the slow speed. And if you have a low test weight wheat like we had this year I would run my fan on a lower setting. I ran on 2 1_2 on my fan to keep from blowing the wheat out.