Justin
Guest
Please look into a Crary Finger Air Reel when you get a new head. You can simply order them less the reel. You won't go wrong.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Need advice on platforms
dingo
Guest
It wont be a problem with a 30ft front unless you country is hilly and then maybe when you trade in after one of those big harvest you get and buy a new machine with a contour master on it.
dingo
Guest
It wont be a problem with a 30ft front unless you country is hilly and then maybe when you trade in after one of those big harvest you get and buy a new machine with a contour master on it.
logan
Guest
Also check out Advanced Wind-reel Systems. Call (519)347-2251 or e-mail loganjd@orc.ca . We have a new system for JD maximizer combines which mounts the blower on the combine and drives from the primary countershaft.
Slack
Guest
does anyone have any problems with the STS like damaged grain , rotor blockages , grain loss , HP if you do can you please write back as fast as you can thank you from slack
SlACK_AND_SEAGUll
Guest
does anyone have any problems with the STS like damaged grain , rotor blockages , grain loss , HP if you do can you please write back as fast as you can thank you from slack
Erky
Guest
We have been running a 230 head on our 9500 since we bought it and works fine. we have a 17ft auger but is a little short so we put a Calmar boot on to move grain flow out. A 20ft auger would be lots. A lot of neighbours cutting lentils and peas are loving thier Honeybees. If you cut beans it is your best bet as you don't need a rigid and a flex just a draper.