Combines Need help on 644 corn header

[gben]

You, my friend, have a bad gear box, nothing a few hours at the shop and $750 wont fix. About a 2 or 3 hour job the first time to take a row unit off and put it back on. Unless you have a well equipped shop just remove the row unit and take it to the Deere dealer to have it rebuilt.

 

[Roy]

I have a gearbox rebuilt by my dealer with all new gears and bearings, new rolls, ready to bolt on. Been on the shelf in my barn for two years now. I don't raise corn anymore. Will take $1000 for all of it. located in Hereford TX. E-mail watfarms@starband.net if interested. Thanks, Roy

 

[l]

Check the roll pin in the front of the roll. Is it missingIJIJ If not the triple gear in the gearcase broke.

 

[guru]

three things one the rool pin is missing or come out...2 the gear on the end of the roll shaft has strip the teeth and 3 u have split the three way gear i would say the three way gear has split on u quite common on some heads it is a simple job to do and not that complicated and u should have all the workshop equip ment to to it we can do them in hour start to finsh...the only real trick is to make sure u time the rollers when refitting good luck