Rooster
Guest
Is you combine cracking (breaking grain)IJ Or, are you trying to break in your combineIJ If cracking grain, you might want to check to see if the "intensive threshing" segments are installed. These segements are attached to the pre-concave (accessible from the rock trap when the concave is at 50mm) and overlap onto the main concave to give a bit more wrap using 8mm key stock, for added threshing ability. If running the concave too tight, these segments will do more harm than good (they are only to be used in very tough conditions). You might also want to check the parallelity of your concave. The right hand side may be running a bit tighter than the left hand side with the sensor is telling you.