shellman
Guest
Sounds like you need to adjust the feeder face plate angle. That will change the angle of the row unit and possibly help. My .02
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines New
todd08
Guest
Sounds like the 2212 head is going a little to fast. We had to change the gears on the outside oil boxes to direct instead of overdrive. One spocket I believe is 32 tooth and the other 26. Put both 26 on one side and both 32 on the other side and compensate the chain likewise. I bet they are all shipped in overdrive from factory. let me know if that helps.
jakebird
Guest
New Holland knows about the problem with the knives, and they are working with them on this problem
Jake
Guest
1st the AFX rotor was at the farm progress show, it was in all the corn machines in the field
jd9750
Guest
Are you saying that the Afx rotor was in those 2 2388 combining that we saw on Tuesday morningIJ
Rooster
Guest
Why has the AFX rotor been pulledIJ The local Case dealer was informed that it will not go to market yet, I am simply wondering why since it was available for a short while and then pulled once harvest got under way...something fishy.
Tom
Guest
I wish that CNH Global would have left well enough alone. I think that the case corn head, as well as the 1020 platforms were the best available. They must have had to concede a few designs to keep New Holland happy!!!
Jake
Guest
YES
todd08
Guest
Does the corn head that you are complaining about pulling in the stalks (tops and all) have the std rolls (knife rolls) or the optional rolls (fluted rolls) a 3000 -$4000 deductionIJ Just curious.