Combines P1 and P3s

[John]

All of the N's have the P1 originally as do the original R's. The P3 was introduced somewhere at the end of Deutz and the beginning of Agco. And if I remember correctly a P1 can be converted to a P3 but not the reverse. HyperHarvest will probably know exactly when and how.

 

[D]

Yes, there is a conversion available from loewen, converting P1 style cages, to P3 style cages. They supply doors and_or cages that are made like the P3, with larger holes and less door ridges to trap straw. Actually can get rid of the cage sweep, as it is no longer needed after installing the new style.

 

[t_leslie]

NO such thing as a dumb question....... r50,60and70's and earlier have p1.... R52,62and72's are p3..... I wonder what happened to "p2" IJ

 

[Dan]

P1 is used in N5,N6,N7,R5,R6,R7,R60 up to and including 1989, R70 up to and including 1989. Some pilot P3s may have been in 1989 or prior machines. Small P3 is used in R40,R50,R42,R52. large P3 is used in 1990 and newer R60s, 1990 and newer R70s,R62,R72. R62 and R72s are basically fat R50s where most every thing is wider with the simplicity of the R50s. My question would be what are the P4s going to beIJIJIJ

 

[Hyper_Harvest_II]

OK Dan,are you hiding something from usIJSeems like some Dealers have an inside track to undisclosed information.400hp and bigger diameter cylinder would be my guess.let the cat out of the bag and tell us what you knowIJ............. Hyper Harvest II

 

[Dan]

Dog gone it Hyper now you got me dreaming again. 400Hp OK. Unsure of the larger diameter. How about a C62 feeder feeding a pair of R52 concaves side by side just before it hits the natural split flow P4 processing system. What a beast it could be. Dream on.