Combines Planter w duals

[likesmxbutdrives8420]

you will have to have a spacer installed between your dual and your hub. Probably will have to have your hub run in a little way to offset the spacer, depending on your tire size. We run spacers on 20.8x32 and have to have the hub all the way out but on a 46" tire the hub is not all the way in, and we are on a 38" pattern

 

[m_farm]

Thanks for your input...where do you get the spacersIJ

 

[jp]

Wrote this last night, guess it was deleted for being not combine related. It is possible with 18.4x42s to not have the dual running down a corn row without a spacer installed. Our hub is at the very end of the axle, no spacer, we clear the row by a few inches. We aren't tracking a true 36" from the inner tire, but we also aren't hitting a corn row either. I can drive down rowed corn with the duals on and not run down any corn. Specs on our stuff, CIH 7220, 18.4x42s, 36" rows, trailed Kinze planter.

 

[deadduck]

Unverferth makes them, as well as other folks. Your CaseIH dealer may have some. You could also call a salvage yard and could probably get a set there to fit your Magnum. 10" would probably be a good size for you.

 

[farmert]

I've got a set of 10" hubs that will fix you right up. email me @ farmertony@aol.com and maybe we can make a deal

 

[steve_c_il]

There are 5inch spacers for sale on agriculture .com web site under toptalk machinery marketplace. HTH

 

[chadh]

while on the topic of spacers, i have a set of spacers for the front end, they are unverferth, fit mfwd magnums. we don't have a magnum any more. would like to get rid of them.