Silver_Bullet
Guest
What does this look likeIJ A wedge shaped piece that goes between feeder house and headIJ Does it tip the head up in the front or downIJ Thanks
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines platform tip kit
augerman
Guest
It is 2 brackets that hook on the feeder house and then the platform hooks on them, There are some small triangles that go on the side of the feeder house to keep the beans in. It tips the front of the platform down 2-3 inches. It makes a big diference in the ability to cut soybeans close
sri
Guest
how does it do in stones,if the knife is tipped down toward ground it seems like it would dig more rocks
augerman
Guest
You would think so but we have not had a problem with it. It is a factory Deere addition
BMONEY7
Guest
No it doesn't. It tips the front up, so the angle is improved. It's only needed on the combines with these really tall tires (20.8x42 duals). The platforms_feederhouses were designed for 30.5s and not these. It does allow for you to cut closer and NOT DIG. Thankfully the 60 Series will finally have an adjustable fore_aft feederhouse.