Combines POlY AUGER FlIGHTING

[Unit_2]

Here is a link to a company that you can check out.

 

[Big_Al]

It is an excellent product I have used it on my combine. I am a distributor for the company I have all the info you need on it. Post back an email or phone number if you want more info. Even if you buy from somewhere else make sure that you get the poly from the lundell Corp. I can't say enough about this product.

 

[doc]

Maybe I got a bad batch of poly when I used lundell products but I wasn't very impressed with it. I put poly flighting in the infeed auger on my grain cleaning setup. I had hoped this would help cracking in pulse crops. It did help (also alot less noisy) but the flighting only lasted about 65000 bus. It was completely worn out. For the price of it, I figured it should last years. I have since went back to steel. So if anyone can tell me why it wore out, I'd love to hear from you.

 

[Unit_2]

Hey Al, I have a 45'X 8" auger. The bottom end where the grain is unloaded unto is worn very badly. looking up into the tube of the auger the flighting does not look worn that bad inside the tube. I've been wondering if I could get a two or three foot piece of that poly flighting and fasten it on to the bottom end and give that old auger more capacity.

 

[Big_Al]

Hey unit 2 you can get pieces for your auger I got some for a guy who is doing the same thing as you want to do. Post an email and I will let you know or if you have the name of your auger that would help too. You can get most any size you need just need the proper measuremnets. Thanks

 

[TIMAR]

Thanks guys. Dad ended up just having both pieces re-flighted. Cost $275. lot cheaper than new ones from JD.