magnum_man
Guest
At least they have a slip clutch. My J.D. does not have one and breaks pulleys.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Problem 8010
farmboy
Guest
I don't remember how the 8010's are set up, but I know on the 2388, the slip clutch had a grease zerk to grease it. Why, I don't knowIJIJ We had that problem on wheat harvest with a couple combines, we just quit greasing it, and on one of them we had to shim up the springs on the clutch to hold tighter. Seemed to fix the problem.
Mo_Rice
Guest
I had an 8010 and had the problem you are talking about. After 5 set of slip clutches we finally found the problem. If was the seperator clutch that was slipping causing it to overload the elevator thus slipping the clutch. I hope you are having better luck than i had with the 8010 we had