Old_Pokey
Guest
I did not have this problem, and the folks I know that have had this repair done have not had the problem either. Thats not to say it cant happen, its just not that likely. I think the dealer needs to look closer at the part numbers or missed installing a part. One seal is bad enough, but the second one should not have leaked unless it was the wrong part or they have some very poor or inexperienced help doing the work. Those are a very high pressure pump and the tolerances inside are to be just right or problems will occur. If n3 leaks, have someone else look into it or try to be there personally and watch over the repair. If you take it to someone else, make sure you tell the dealer that if its something they overlooked or did wrong, the bill must be adjusted accordingly. And make sure the person at the dealership is someone of authority so there is no getting out of it. Good luck. Hope you can get the machine to field this time.