Combines Pusher RWA

We have the factory RWA on our '95 model R52. It has 16.9-26 on the rear and 30.5-32 on the front with heavy duty final drives. The sticker on the rear axle says Mud Hog on our machine. So far as performance, its great. Wouldn't have another combine without it.

I have a RWA off an 84 model l3 on my M2 and finally this year had bronze bushings put in the pivot jounts. I beleive they were abused and worn out when I bought the unit 6 years ago. Otherwise it has been flawless and the best money I have spent on the machine. I would never buy another machine without RWA unless it were a sweet deal and a RWA unit being added in the immediate future. As far as maintenance, grease the joints, keep good lube in the hubs and good hydro oil flowing and they should run trouble free longer than anything else on the machine. Good luck

We have a Gilcrest Pusher unit on our 91 R60. It was on the machine when we bought it. We haven't had any trouble with it and it seems well built. I looked up there website about a year ago and it seems like they built paving equipment also.