silverluv
Guest
Have you checked your shoe drive beltIJ Could possibly be slipping and slowing the shoe down.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines R 60 cleaning grain
Brian
Guest
Go to "Tips" section and click on Gleaner upgrade page. These modifications will solve this problem and others that you don't even know you have.We've done these upgrades on our combines and they work.Brian
Tom_Russell
Guest
I totally agree with you, Brian. Combining is actually fun again since we modified our R60 with P1 processor. Now we can set it and forget it with an added bonus of absolutely no dockage along with reduced grain loss. Thanks to Hyper I and II, lbran, Dan and others for passing along modification info. Tom in MN
tbran
Guest
take a look at the auger troughs under the dist auger, if the bottom is covered on the lh side take the chute off and let the grain fall to the lh side. Nathan ran in to this the other day.
SID
Guest
Checked that already. No cover under the left side auger. Thanks