Combines R52 circuit breaker

[T__langan]

We've not ran across that problem (yet!) with our '93 R52 but I would suggest shutting off your headlights before hitting the bin unload switch. This might take some load off that breaker. Sounds like you have an electrical quirk somewhere, maybe the breaker is badIJIJ Good luck-

 

[acre_eater]

we had the same thing happen it seems like we moved the breaker to the other side of the frame to finish one year and then we added another breaker so that they where not overloaded good luck Tim

 

[Dan]

If my memory serves me right all breakers were to be moved out of engine compartment on the '92s. I believe if you go to buy the breaker you will get a 105 amp. We put the 105s on when we had trouble.

 

[Mr__Clean]

We had the same problem with a 92 R-42. Make sure all of your ground connections are good. Move the breaker on the other side of the frame away from the heat. Not much fun sitting in the middle of your field in the dark watching your neighbers combine. Can't even listen to the radio.