Combines R55 Wheat settings for the new rotor

[tbran]

If this is a field installed unit make sure the concave is zero'd - we have had to remove the jam nuts to get the grate right. Also be sure to move the lower grate up and rezero the 'mid min max' gauges. We have been running very close - 1 in most cases because the late freeze and droughthas really caused problems. We see little loss of capacity - even this close. If you can run 2-4, great. Otherwise sets just like reg cyl.

 

[Indy_Gleaner]

Thanks, last year was my first with it, and was told to try the 6 setting on seperation side after we had finished. Will try your settings thanks again. Richard

 

[Rolf]

G'Day guys Don't know the new rotor, but don't be afraid to use four or more filler bars in the concave area in doughted out crops! has made a big difference to our low yielding small grain threshing. Rolf