Combines R60 Rowhead Adapter and l3 Variable Drive Ques

[big_orange]

1.Dont know on the adapter,but probably not. 2.Variable speed header drive only used with the corn head,lock out for grain table.there should be a hose under the cab on left side that will couple into the back sheave on header drive.Reel raiseandlower switch controls. 3.I think both hoses are for reel height,speed system is self contained on the head and controlled electically.

 

[K_stater]

I notice the later model l2s and l3's have only the one hose going to the header instead of two. What is the differenceIJ

 

[big_orange]

I was wrong with the 2 hoses ,there is just a single hose for reel height.Been 2-3 years since I ran one.sorry

 

[andy]

The later l2 and l3 had self-contained heads with an oil pump on the head to run the reel. These head only had one hose going to the combine for the hieght and a wire for the speed. The early l's and l2 had two hoses one that ran the height and the other ran a variable speed pulley setup that controlled the reel speed. Hope this helps Andy

 

[mailman13]

We run a 853 and 653 row crop head on our R62. It is the same Bish adapter we used when we had an R50 so it should work on an R60. The adapter you have won't work because of the feeder house opening offset and narrower throat. www.harvsfarmsupply.com is the site that sells Bish adapters. They should be able to help you out.

 

[kurtk]

I would like to know if you would like to sell the bish adapter for the l2_l3IJ If yes what priceIJ thanks Kurt

 

[Silver_Bullet]

Kurtk E-mail me, I've got two adapters JD head to l2. They won't fit a rotary machine,But they make a l2 really shine

 

[husker_gleaner]

I have an lM to John dDeere head adapter if it will do anybody some good. Im located in south central Nebraska.

 

[kurtk]

What would you like for the adapterIJ My e-mail is kurtk@mts.net