Combines R62 plugged fuel line

[tbran]

I can't remember the range but a few of the combines got out with the inlet and outlet hoses reversed. Barring that on some tanks where floaties of some fashion suck down over the outlet, I have used a length of thin mig weld wire inserted from the outlet tube into the tank a few inches and left there. The wire sticking through will prevent a piece of silicone from sucking in the hole. About the best you can do is go in through the fuel sending hole.

 

[Dan]

Run fuel down as far as you can and then pull fitting out of tank. Be ready for fuel bath if you don't get all fuel drained. There should be a screen on fitting. like tbran said hoses were switched around at one time. I haven't found any switched but if they are the screen would be on return line.