Combines R72 Engine Oil Dipstick

Add mark on new and old dipstick is at the same spot. The max mark was lowerer on new stick to prevent getting oil to close to crankshaft. Your machine should be fine for it was only the '96 and some '97's that needed dipstick. You may be able to pull new dipstick out without twisting but it should pull hard. Yea I think as long as sprocket teeth all lined up your chains will be fine. Good luck

Forgot capacity. It should be 35qts with filter and 32 w_o filter. I forget what the R72s with l10 used but seems to me that oil can catch crank on them to. I just suggest to never add oil unless oil is on add. Maybe the steep hillside guys would do something different.

Thanks for the info Dan, I took a closer look at the dipstick today and it is a kind of a T shaped one and it has a slot on it to act as a lock if you would turn it to the right like a quarter turn. Finished up the seperator grate and am going to install it. I would like to take a picture of it if I could and post it but I don't have a very good camera for it. Well thanks again and good luck with the small seed kit. Wish I could help but have never been involved with that type of grains.