Combines Replacement sheets for under auger on 20ft 973

We put poly under a 20' 972 about 12 years back. It seemed to work good. I think we got it from May-WesIJ It was in sheets and you had to drill the holes out. Not to bad to install. I had a late 25' 973 flex head that had stainless under it and that was even better. I would think you could get that from NH. I'm sure stainless would cost more than poly. Ilnh

for 10 years now , we have been puttin UHMW plastic in combines, we sell, everywhere grain can lay over a season and not get properly cleaned out. the header gets the UV_temperature balanced version of UHMW. just this year we've built our first rippled front grain pan, made from 1_2" puckboard. the UHMW is the wear resistant type, more expensive, but in our oldest combines, it doesn't wear out and certainly won't rust which is our biggest problem. one word of caution, clean the wheat out real good cause rats come to wheat and will eat this plastic if they run out of wheat. hope this helps.