Combines replacing stock rolls

[bh]

Those things are a real bxxxh. We borrowed the puller from the Deere service shop. Broke one of the pins in the arms on the first one. After that we cut each one with the torch. Some still came off very hard even after that and using the puller. Gotta do a whole 'nother head this year and not looking forward to it. Good luck. BH

 

[dakota]

Yeah, they require lots of patience and lots of penetrating oil. I welded reinforcements on our puller and use a 3_4 impact to run it. When I put the stalk rolls back on, after hard facing, I use lots of antiseize.