John_W
Guest
Don't think it too tough. Just need an adapter.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Retrofit Cornhead
canuck
Guest
Contact me ....cybermanone@hotmail.com. I've done a few and am in Ontario also. Put corhead in subject so it doesnt get deleted with the junkmail....haha
Freddy
Guest
Was out looking at cornheads last week.C_H dealer in Sparta has some older style White heads retroed for C_H base units.From what i saw it didn't look like much of a job to change over and no adapter needed.Can't remember if there was a 6 row wide there or not.Had 3 or 4 units there.It might be worth a drive to check out
willbur
Guest
One of those heads in sparta was mine! I would recommend it if you dont have many acres. I had to widen the throat of the header a couple of inches and put a piece of square tubing out front of the main beam for the feeder face to sit into, it wasnt hard. If you have a 2100 series combine you will have to nip off that header step on top.
guru
Guest
john deere corn front to 2188_2388 about a days work no alteration apart from taking the walk way from top of throat away... feeder house we didn't adjust at all for a 963 head .. we made a aadapter up which hooks on to the case throat using about 1_8 plate on top we bolted the john deere head locaters and we use the case locaters down be low to to hold it in place no other bolts required u can buy jd couplers to go straight on to the header or just use a drive shaft.. hope it helps the adapter one person can put it on in about 5 minutes