dff1460
Guest
Hose Mod for Flex Headers lay a piece of 3" suction hose behind the cutter bar and clamp it by bolting conduit clamps under the existing hold down bolts. The crop will be flipped over the hose and actually be 3" closer to the reel, thus eliminating feed problems do to short beans. It seems there has been some confusion as to hose sizes. Try to find hose that is close to 3" O.D. - it may end up being closer to 3.5" depending on the hose you find. There are also some people using 3" PVC pipe cut into sections to allow cutterbar to flex. See link below for Picture..