kidroff
Guest
Put a big hose clamp around the seal. That should work
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Rotary screen seal
robbie
Guest
Chewed up a clamp 1st replaced clamp,then seal tore up,May try making one out of a strip of carpet as a standby.Air_Co also conked out same time,Joys of Farming.
robbie
Guest
Is it vital to have that teflon tape on the rotary screen for the rubber seal to run onIJ
JJS
Guest
It does make the seal last much longer.But if the aera thar it rides on is real smooth, it can be run that way. but noy recomended
AJTIII
Guest
robbie,
robbie
Guest
Slowly nutting it out,Previous owner had taken those washers out also had taken the shims out of the support bracket letting it droop slightly.Bolts would catch on the seal at about the 7.00 position.
kidroff
Guest
DO NOT USE BFH! new rotary screen is $800
robbie
Guest
New clamp keeps coming off,have removing screen down to fine art Have checked and trued screen again clamp will not! stay on has now come off again and shredded new seal$170aus,clamp$54aus
Kidd_Farms
Guest
Try cutting a piece of carpet the same width and length as the rubber. Perferably long fibered carpet (thicker carpet). Use it in place of the rubber. This has fixed our problem.