Combines round hole sieves for 760

hv_user

Guest
let me say first that I don't know anything about rice harvest. What I did on my 760 was put a sieve on the front bottom section. I have never liked round hole screens for wheat or barly.later model 860 had this option and everything slid in from the back. If you buy one of these sieves and take out the welded cross bar on the bottom you can do the same thing. I liked this setup it put cleaner grain in the tank and less on the ground. Good luck
 

rice_farmer

Guest
Thanks for your ideas onion farmer, l'm only in my second harvest with the 760 and still try to get used to the three sieve system. My manual only gives me settings for
 

rice_farmer

Guest
Thanks greyhawk, l went a bit faster today and drove it to how hard the motor was working , trying to keep the engine revs at 2390 and 2400, it made a difference to the sample, not getting too many short bit of straw in the sample now , and not throwing too much out the back. In rice you only travel at 2-3 mph and all flat ground so you have a bit more power up your sleeve for thashing. At one stage today l was getting a full box in seven minutes, the chaser bin driver is now complaining that l'm working him too hard and no time to light up a smoke.
 

Hal

Guest
Give loewen a call. They manufacture sieves and could likely tell you what size you need.
 
 
Top