Part_time
Guest
I'm pretty sure that you would have to change the hole location of where the center pivot tube bolt's in. My dad just bought RWA for the M2 we are using. First we looked at a unit off of a N5 but it was wider wheel spacing and the center pivot tube bolt hole was different. We ended up with a unit off of a l3 because it was the same mount and width that we had. They also had a unit off of a R5 that had height and width adjustments but it also mounted a little different and was way more expensive. I'm not sure about power, but they all look like they were driven with simialar hydraulic motors. Also all the center pivot tubes are the same diameter on three that we looked at. Part-time