Combines seperator clutchandsheaves on M2

The bin unloader pulley unscrews from the clutch assembly,remove the brush holder,then use the rock door wrench in the pulley,tap the wrench with a hammer and they usually come loose.Might be a left hand thread,can't recall for sure.Then you can disassemble the clutch and it comes by the elevator.Make sure you note how the clutch comes apart,cause it will fit backwards,thats an expensive mistake.

Once you pulled cylinder drive pulley or sheaves (depending on year) you can pull mainshaft out to the left as you capture the sheaves on the right. No reason to monkey with tailings elevator. Good luck