big_orange Guest Oct 2, 2004 #1 I used a Crary bolt together on a 315 head,it stood up fine.There were 4 bolts and a special 4 hole section where it bolted together.
I used a Crary bolt together on a 315 head,it stood up fine.There were 4 bolts and a special 4 hole section where it bolted together.
T__langan Guest Oct 2, 2004 #2 We're using a Shoup right now. Works fine, but the sections are more difficult to replace where the bar is spliced together. That's the only drawback we've encountered. Tom langan
We're using a Shoup right now. Works fine, but the sections are more difficult to replace where the bar is spliced together. That's the only drawback we've encountered. Tom langan