wild_bill
Guest
you can get a 15ft 820 flex for about a 1000. good luck Bill
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Smallest platform for a 1460IJ
wild_bill
Guest
you can get a 15ft 820 flex for about a 1000. good luck Bill
DF
Guest
DEFINATlY GET A FlOATING CUTTERBAR FOR THE BEANS. WHY ARE YOU WANTING THE SMAllEST PlATFORMIJ
tmellfam
Guest
Storage ease and door sizes.
George_2
Guest
I would put a 17.5 foot unit on it. That is about the largest unit you can go down the road with without a header wagon. If you can make your door wider to fit, that would be your best bet. The 1460 is really a 20 foot machine in wheat and soybeans and with a 17.5 foot header you can go a half mile per hour faster and still do a good cutting job. Any smaller and you won't keep the cage full and you end up with a poorer threshing job.
tmellfam
Guest
Sounds like good advice,guess that is what I better look for,thanks.