Combines steering pressure on 95 R62

[max_doubt]

check for foreign material in priority valve, maybe part of an oring or inside of suction hose. We lost the steering on a 94 R62 and found a chunk of what we believe was the inside of a suction hose since we had recently had those hoses off. good luck to you. Mike

 

[Dan]

I think the '95's had an adjustable valve. The book may not point it out. I have adjusted up pressure on many early machines. I think you could set up pressure on earlier machines that had pressed in plug in a spool to adjust pressure but you better know exactly what you are doing. Have your dealer check service bullitons on this subject for that may shed more light for you. Don't forget to jack up rear frame at least yearly to grease center pivot and spindles until grease splurges out. That way you are sure to get grease where it belongs which will reduce friction dramatically.