jr
Guest
Ramrod
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Straw spreading R 62and72
RamRod
Guest
jr This isn't a straw spreading comment, but a capacity improving change. Maybe everyone already does this; At the header opening to the feeder house, I remove the tin fairing on the right side of the header opening - lets material go in fully to the right hand side of the feeder house and get full use of the right end of the rotor. This shouldn't cause problems unless you have alot of BIG stemmed weeds that can get caught in the chain links and keep going around with the chain. I've set mine up like this for years - good for at least 5% more capacity at same horsepower used. Return comments, etc. appreciated!
Pete
Guest
New Holland makes or used to make a combine with center threshing and a seperation cylinder that would eject the straw on both sides behind the front tires. I think it was called the TF series and was only available in Europe. Peter