Combines tailings return monitor on 88

The one on our 2388 does the same thing :~(. Thing will beep,beep, beep, and when you check it there's nothing in the return. Have the setting on '1' for least sensitivity. The 2366 we owned prior to the 88 also did the same. Annoying to say the least. Sorry but don't have a fix.

Make sure that the edge where the tube of the auger meets the elevator is not catching material causing a stalk or stem to jam the sensor. This edge can be bent down to streamline the flow slightly.

When you go to the tailings monitor menu I don't know if you have noticed that there is a setting to turn the alarm off. You can still see what the monitor is doing but you don't have to go crazy with alarm all day long.