Combines Tech question Header Height Resume w o harnessIJ

yes, you can jump a couple of pins. their was a bulitin on this. but I don't remember which pins.

Just as joe said, you have to cross some of the pins. The combine has to "identify" the header that is on it. If you have another header, like a flex or a ridgid, just look behind the connector. There should be a set of wires, 2 or 3, that are hooked together. Find the numbers, there you have it. Just do the same on your combines plug.

pins 4 and 28 tell jumped together tell it it is a cornhead