Combines tough bean stalks

Steve

Guest
Tighten up the concave. I run mine down around 2 in tough beans. Keeps them from "balling up" around the cylinder.
 

SNOWMAN

Guest
RUN THE CYlINDER SPEED AT 700 TO 800 ClEARANCE AT 1 OR 2 AND lET FIllER PlATES IN .AND RUN AT 4 MPH.
 

GREENMAN

Guest
If you haven't replaced your raft bars yet, you should. We replace ours at 800 hours, and made a new combine out of it. Raft bars can look good but if they have fron rounded edge slightly they are not aggressive, and will not grab. Also, by putting raft bars in you can increase ground speed which gives you more of an even feed at the head, which will increase your capacity. Also, speed up cilinder in green stem beans as long as you dont crack them.
 

silver750

Guest
Take out the filler plates, you won't believe the difference
 

Deere_Topher

Guest
Bye bye filler plates, then go back to field with your new machine. promise. Have a safe and profitable day.
 
You must log in or register to reply here.
 

Footer Links 1

Top