still_galvanized Guest Oct 23, 2002 #1 push pins in past edge of housing so it will fall out. Soak the spring in oil after tapping with small hammer to loosen dirt and rust. good luck.
push pins in past edge of housing so it will fall out. Soak the spring in oil after tapping with small hammer to loosen dirt and rust. good luck.
brent_56 Guest Oct 23, 2002 #2 thank you for the idea! i was not shure if the whole spring unit would come out of the housing. Thanks for the help Bud!
thank you for the idea! i was not shure if the whole spring unit would come out of the housing. Thanks for the help Bud!