Combines TR Unloading Rate

[NHD]

I had at one time put a 19 tooth on one combine and a 22 tooth on the other. The 22 tooth didn't work as well. It vibrated lots more and seemed like it didn't put out much more grain. 19 tooth worked fine. I don't remember how much increase but it was an improvement. Having the auger balanced is a big help.

 

[TR]

Thanks for the info, I will probably try the 19 tooth sprocket.

 

[NHD]

The 19 tooth sprocket is used on the TR-99 so you should be able to find it in parts