Sorry for late reply, been working late untill 2" of rain now. If you also do corn and soybeans with combine I would get the round bar concaves. If you keep universal concaves take out all small wires and put rollers on the large wires. I had this on TR-96 and it would work good in milo. Also keep eye on the fan as it will suck leaves in and put them on bottom side of chaffer and block of the air. Put a screen over fan inlet and clean or shut combine down after every hopper. Most problem if you run dumping on the go and never shut combine off. Also I would only cut the heads and no more leaves than you have to, and run the rotor a little slower if the milo is threashing good. Good luck!