Combines TR98 inside sheave HElP

[NHD]

You just as well get a new one, because any used one would be worn too. In case you haven't read what I have been writing about how to prevent this problem, look at my recent posts. Remember that the inside bearing is the problem so just replacing the sheave won't solve things.

 

[NCNH]

I've read your posts and thanks for such good info. I have been trying but can't get a new one. They're back ordered everywhere. My rep says there are a few on the way but can't say when they'll be in. I'm wondering if it would be possible or feasible to change over to a fixed speed feeder drive. Do you have any idea if that is an optionIJ Your comments are appreciated.

 

[WTW]

I bought one in October from Titan Machinery in Jamestown ND. At the time they had one more. Their phone number is 800-247-1102. Your dealer can also do a search of other dealers to see if anyone has one.

 

[NCNH]

thanks so much for the help.I took my old pulley put 7_8 bolts where the pins were used machine washers in between the pulleys and made a fixed drive. It works great.