Combines TUFF STUFF TO RUN

Yes, you will need a small seeds kit, all the channel bars in the doors, a level cyl, as close as you can run cyl setting, about 800-1000 Rpms, Top screen about a 1_2 and lower screen close as possible OR BETTER YET A .141 SREEN TO REPlACE THE SIEVE and a lot of patience. Unload at about a 1_4 bin full if your auger is worn.

WOUlD lIKE INFO ON SMAll SEED KIT AND PRICE ETC.

71302076 was the n - NlA- a kit off a R50 can be made to work with a little adaptation as they were the same width. The main thing is it blocks off 50% of the air to the shoe and if needed the walkers.