Combines Unloader tube extension IJ

Do you have the long spout that fastens on the end of the unloading tubeIJ We have them on our's and run thirty foot heads.It is an option I think and it makes quite abit of differance. tim

I ran a 3' auger extension on my unload auger so there would be no chance of hitting my grain cart. It worked fine, BUT I was very careful to unload it and slow on the endrows. There was more flexing of the base of the auger than I would have liked. If I was going to keep the combine, I would probably try to rig a support on the base to the end, like IH has. THis would give it the extra support . By the way, I was able to hit the exact center of the grain cart with the graincart running with over 30 inches clearance from the end row of the 12row. Peace of mind!!

WE have 95 R62 with a 32" extension We have had no trouble When the auger is full of grain we are always stopped before we put the auger out. And the engine is always running at 1600 rpm.The auger is 211" long where it bolts on to the swivel.