560man
Guest
We've had the same problem but no solution. I would appreciate anyone's help also!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Unloading auger pins 1660
iaremec
Guest
use regular cotter pin and bend both sides around the pin. hard to do but these very rarely fail. alternative if augers are sharp update to splines. like you said you never see half pins, cotter pin coming out.
Big_bucks
Guest
Install headed pin so that , the head of the is on grain flow side , cotter pin away from grain flow side ,
red_is_real
Guest
are the holes in the auger or gear box getting oblonged_worn. also, are the two augers timed properlyIJ
cryseed
Guest
I had that problem for a couple yr. and after I replaced the unloading auger I haven't had a problem with it. I think when the flighting gets bad it's hard on the pins