john_holland
Guest
if you have ever owned a combine, you know what wore out, check those things first, tires, cab interior, wiring condition, cleanliness, feederhouse (straight; chain tight; sprockets
all belts and chains for tight, all augers for sharp edges and bearing play, sieves for bent louvers, move all the adjusting levers and take all doors_ shields off bring a flashlight and tape measure, check if monitor works properly and watch it run( listen for ticks squeaks, bangs) there is plenty else, just think about everything that goes on inside the combine and look at that part to see what kind of shape it is in, then be prepared for repairs that you didn't notice
all belts and chains for tight, all augers for sharp edges and bearing play, sieves for bent louvers, move all the adjusting levers and take all doors_ shields off bring a flashlight and tape measure, check if monitor works properly and watch it run( listen for ticks squeaks, bangs) there is plenty else, just think about everything that goes on inside the combine and look at that part to see what kind of shape it is in, then be prepared for repairs that you didn't notice