colwood
Guest
I would also like to know the answer to the green corn heads on red combines. looking for a 900 or 1000 series 4-row corn head in the Mich. Indiana or Ohio area. Please post here if you have one for sale. Thanks!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Why JD cornheadsIJ
ds1
Guest
we bought our first 643 deere to run on a l2 gleaner that was bought with no head at auction, then after it blew it's motor,we went to a N5 gleaner that came with 8 row head{we plant 12} so we put deere head on that machine, it wore out in 1999 so we bought 1680 and put it on this, our current machine. also aftermarket parts are cheap and plentiful. we figure it has harvested 14000 acres for us with very little repair
JDJIM
Guest
less parts per row , you can weld up the rolls , I'll agree the Deere doesn't chew the stalks up as much as the CIH but that isn't a problem for me , cattle run on a lot of mine . There are 3 Deere heads on CIH within a mile of here , they are all happy . I'm running a '78 643 on a 1660 , bought it on my 7700 , also used it on a UNI to pick seedcorn . I never did buy a set of rolls , just weld them up every 3-4 years , put new chains on reverse the sprockets and go . Biggest problem I've had it that famous gear that goes out in the gearbox , been through 4 of them .
guru
Guest
yyyyy the john deere head has alot less moving parts and if a gearbox goes there are simple to re do we can have one off and rebuilt in two hours machine running again thats if the housing is not damaged try that with a ih has for tha adapter plate we made it for less tha 400 $
guru
Guest
yyyyy the john deere head has alot less moving parts and if a gearbox goes there are simple to re do we can have one off and rebuilt in two hours machine running again thats if the housing is not damaged try that with a ih has for tha adapter plate we made it for less tha 400 $
guru
Guest
yyyyy the john deere head has alot less moving parts and if a gearbox goes there are simple to re do we can have one off and rebuilt in two hours machine running again thats if the housing is not damaged try that with a ih has for tha adapter plate we made it for less tha 400 $
Aar
Guest
I have a 944 I am going to sell, do you need a 36" headIJ aarontcombs@yahoo.com
mx240
Guest
Just ordered a 893 header for new 2388 combine it was $2500 cheaper than a new 2208 that have problems!!