Combines Wide Floatation tires on 2188

[ripped]

It will require a rim spacer welded into your current rim. It may also require an axle adjustment. I currently run a 2166 and also had the 30.5x32 tires but upgraded to a 900_65x32 Michelen. It was basically the biggest tire I could go to without spending any money on the rim or axle. Saved a lot of headaches last fall with the mud. Approx. cost $8500 (can). NDB

 

[Farm_Kid2]

The Michelin 1050_50-32 radials require the 3-piece rims. I'm not sure you can space the factory rim and make it work. I prefer to use the 7-1_2" frame extensions and tie rod that normally are used with duals. Then, you can have your rim made with minimal offset. This takes all the stress off your final drives and works great.