Combines wide spaced cylinder bars

Which GleanerIJ

check out earlier posting on f3 wide space bars.

loewen supplies wide spaced cylinder bars for all combines. You could likely get them there.

Thanks for the replies so far guys. The combine is an F2.

They don't have them for All combines. Can't get any for my K2 from them. I wrote down Trimpe's number somewhere but can't find it right now. I think they can redo the ones you've got now if they don't have for your particular model. St. John Welding might also be able to rebuild standard into wide-space.

Although quite pricey tell your local parts guy that 71325106 is the AGCO n. They come in pairs. Trimpe out of Seymour, In., if thats how you spell it, is where we usually send our customers and really stress they hardsurface the FRONT of the leading edge as well as the top. They will exchange or do yours.

Trimpe bars, located near North Vernon Indiana 812-522-1398 or 812-522-6036. They will send them to you UPS. also if you have a good set of used factory bars (3_8 height) they will take in trade or rework your own bars. These are factory bars modified and perform very well.